Thermomechanical cycling — two temperatures
The thermomechanical cycling machine combines the Biocycle and the Termocycle, so it performs both thermal cycling and mechanical cycling. These can run simultaneously or separately. It is the most complete way to simulate human chewing. In the mechanical fatigue test, the pistons can reach 200 kgf (1.96 kN) on each specimen. In the thermal shock test, one bath can be set as the user requires between 0.5°C and 25ºC and the other from 25 to 60ºC.
Mechanical cycling unit
Specifications of the mechanical section.
Customizable number of specimens (2, 4, 6, 8, 10, 12, etc.) (depending on the model)
Control of the load applied to each specimen from 0 to 2,000 N (or 0 to ~450 lbf)
Cycle count setting with 12 digits, up to 1 trillion cycles with automatic stop
System protected against power outages
Compressed air pressure monitoring
Adjustable piston frequency up to a maximum of 5 Hz
Independent setting of piston advance and return times
Backlit LCD interface
Voltage: 220 V
1-year factory warranty
Ongoing technical support
Thermal cycling unit
Specifications of the thermal section — two temperatures.
Setting and counting of the number of cycles with 10 digits (maximum of 4,250,000,000 cycles)
Automatic shutdown at the end of thermal cycling
Bath with 11-liter reservoir
Automatic water level refill system
Digital temperature indicator
Digital temperature control
Bath 1 – (-0.5°C to 25°C)
Bath 2 – (25°C to 60°C)
Voltage: 220 V
1-year factory warranty
Permanent technical support and spare parts supply
Models — thermomechanical cycling machine
Explore the available models.
Request a quote
To learn more about the two-temperature thermomechanical cycling machine such as pricing, commercial terms and delivery times, contact our team.