Biocycle V2
The Biocycle V2 performs mechanical fatigue tests that bring testing closer to the conditions found in the human mouth, improving in vitro research methods that simulate human chewing. The mechanical cycling machine can perform compression or impact tests, and also allows "sliding" of the specimens, simulating bruxism movements. Because it is driven by compressed air, it can reach frequencies of up to 5 Hz without losing efficiency, and up to 10 Hz in specific cases. Its structure allows 2 to 12 test specimens to be tested at a time, so mechanical fatigue tests can run simultaneously.
Main features
Specifications of the Biocycle V2 mechanical cycling machine.
Customizable number of specimens (2, 4, 6, 8, 10, 12, etc.) (depending on the model)
Control of the load applied to each specimen from 0 to 2,000 N (or 0 to ~450 lbf)
Cycle count setting with 12 digits, up to 1 trillion cycles with automatic stop
System protected against power outages
Compressed air pressure monitoring
Adjustable piston frequency up to a maximum of 5 Hz
Independent setting of piston advance and return times
Optional sliding module for bruxism simulation
Backlit LCD interface
Voltage: 220 V
1-year factory warranty
Ongoing technical support
Accessories
Accessories available for the mechanical cycling machine.
Thermal container
Extender
Fatigue detection
D2 fixture
